Glass Fiber Content Over 22% Sheet Molding Compound SMC for Shower Base

• Material: Composite Material
• Application: for Shower Base
• Fiber Content: 22%-25%
• Color: White
• Width: 90cm
• Pressure: 5-15MPa
• Model NO.: SMC
• Temperature: 145+/-5degree
• Maintaining Time: 1min/mm
• Transport Package: Carton and Pallet, Zig-Zag Packing, 1000kg/Pallet
• Specification: A Grade
• Trademark: utek
• Origin: China
• HS Code: 3921
• Production Capacity: 10000ton/Year

Product Description

 

Product Description

Description for SMC:
Sanitary grade SMC gives finished products glossy  surface. It has low shrinkage and is water-resistant. 

SMC is a combination of chopped glass strands and filled polyester Resin in the form of a sheet. Processing SMC by compression or injection molding produces bodywork or structural automotive components and electrical or electronic machine housings in large industrial volumes. The process is also used for other products such as sanitary ware (baths) and urban furniture (stadium and cinema seating).
The pre-preg contains all the components needed to mold the final part (resin, reinforcement, filler, catalyst, low Profileadditives, etc.) in a malleable and non-tacky sheet.
SMC pre-preg is made from chopped glass strands sandwiched between two layers of film, onto which the resin paste has already been applied. The pre-preg passes through a compaction system that ensures complete strand impregnation before being wound into rolls. These are stored for a few days before molding to allow the Prepreg to thicken to a moldable viscosity.
 

Item	Standard	Data	Remark
Density( g/cm³)	GB1463-88	1.82	///
Glass fiber content(%)	GB/T15568-95	≥22	///
Water  absorption(%)	GB1462-88	≤0.2	///
Average Shrinkage (%)	GB/T15568-95	≤0.02	///
Tensile Strength(Mpa)	GB1447-83	≥50	///
Flexural Strength(Mpa)	GB1449-83	≥120	///
Impact Strength( kJ/m²)	GB1451-83	≥50	///
HDT(ºC)	GB1634-79	≥200	///
Color	White

Pressure MPa 5-15
Temperature º C 145± 5
Maintaining time: Min/mm 1.

Technical Data Sheet

 

Type	Application
SMC-A (electric)	High mechanical strength products such as high/low voltage switch box, insulation plates
SMC-B (flame retardant)	High mechanical strength and flame retardant products such as signal lamps, cable tray
SMC-C (high-strength)	Special high mechanical strength products such as hammer handle
SMC-D (general purpose)	Non-electric products such as chair, water tank
BMC-A (electric)	Electric parts with common mechanical strength
BMC-D (general purpose)	Non-electric press mould products with common mechanical strength

 

Product line

 

Detailed Photos

Give us a chance, and we' ll return you with satisfaction.