Highly Conformable Fiberglass Flow Mat for Close Mold

• Certification: ISO
• Technique: Needle Mat
• Mat Type: Stitch Bonding Mat
• Fiberglass Type: E-Glass
• 3 Layers: 2 Layers Is CS, Core Is PP
• Core Materials: PP or Nylon
• Model NO.: MNM300/250/300
• Process: Close Mould or Lrtm
• Suitable Process: Rtm
• Roll Length: 1050mm, 1250mm, 1270mm
• Transport Package: Carton and Pallet
• Specification: MNM300/250/300
• Origin: Changzhou, Near From Shanghai.
• HS Code: 70193900
• Production Capacity: 200ton/Month

Product Description

Fiberglass sandwich mat called Flow Mat as well, made with polypropylene non-woven core and chopped strand stitched together mechanically, 2 layers of 300gsm chopped strand mat with 250g/m2 PP core, it is used for all the closed mold process needs and helps improve productivity and quality. Easy flow core for rapid wet-out and mold filling.

To reinforce polyester resin and polyurethane resin.

The weight of PP is 180GSM and 250GSM.

The application: Bus roofing, wind blade, boat, truck bodies windmill and so on.

Technical Data:
 

Product Code	CS (g/m 2 )	Core (g/m 2 )	CS (g/m 2 )	Total Weight (g/m 2 )
M300/P180/M300	300	180	300	780
M450/P180/M450	450	180	450	1080
M600/P180/M600	600	180	600	1380
M300/P250	300	180	--	480
M450/P250	450	180	--	630
M600-/P250	600	180	--	780

Properties:

No binder,no warp and weft direction corssing,no ruffled.
No displacement deformation.Good resistance to erosion,fast wet out.
Fast resin transfer speed,good manufacturability,good workability.
Good physical and chemical properties,and easy design to solution.

Picture of Product:



Packing & Storage:

Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.



Give us a chance, and we' ll return you with satisfaction.