Fiberglass multiaxial products are available in a wide variety of weights and fiber architectures from unidirectional to quadraxial. Each fabric was given a certain weight percentage distribution to meet the demands of the marketed product.This product is used in blades of wind power turbines, boat manufacturing and sports devices. Suitable for hand lay-up, pultrusion, RTM, infusion process.
Properties:
Final products are with mechanical properties in multi-directions,and could freely design the reinforcing effect in each direction to meet actual needs.
The multi-layers structure could simplify the forming process,improve operation efficiency.
Quickly wet out(resin),good molding property,easily delete air bubbles.
Packing & Storage:
Each roll is put into a polyethylene bag,fastened the bag entrance and packed into a suitable carton upon to customer's request,this product could be shipped either with carton packaging only or with pallet packaging,the products could be put on the pallets and fastened with packing straps and shrink film.
This product should be stocked in dry and cool places.The best condition is with temperature between 5
ºC and 35
ºC,with a relative humidity between 35% and 65%.Please keep the product in its original packaging before use,avoiding moisture.
Main Specification:
| Construction |
Area Weight(g/m2) |
Tolerance(+/-%) |
Material |
| 0° |
315 |
5 |
E-glass |
| +45° |
105 |
5 |
| 90° |
/ |
/ |
| -45° |
105 |
5 |
| Stitching |
≤10 |
5 |
Polyester |
Picture of Product:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}